We all dislike cleaning the clogged drains of the bathroom sink, bathtub, and showers. It is neither a pleasant job nor an easy task. Thankfully, tub shroom has made this job easier for you. Tub shroom is a hair catcher and stopper. It fits into the bathtub drain and catches hairs and residues to prevent them from entering the draining pipes. As a result, you no longer need to clean the drain.
However, you must clean the Tub shroom to help it provide the best results. Here, we will guide you on how to clean tubshroom with the most manageable steps. Cleaning the Tub shroom is not a meticulous job. So, you should find it straightforward.
We will also discuss how to use the Tub shroom properly to keep your bathtub and draining system running correctly. If you are tired of cleaning the drains, let’s dive into this article.
What Is A Tubshroom?
Tubshroom is a newer hair catcher and bathtub drain stopper. You place it right at the drain stopper’s place in the bathtub. It will protect the bathtub drain from getting blocked by catching the hairs and residues around its perforated body.
The product is like any standard hair catcher and drain protector on the market. However, it gets a unique name from its company. Yes, tub shroom is the first cleaning product from the company with the same name.
You can get the tubshroom in two different sizes:
- 1.5 inches
- 1.75 inches
Henceforth, it will fit in the stopper position of all the bathtubs. It frees you from the tension of finding the right size bathtub drain protector. Also, the installation process of the tub shroom is easy. You will need to put it in the draining mouth, and it’s all set. It makes draining the tub easy even without appropriate bathroom slopes.
There’s also a variation of the Tub shroom for placing in the bathroom sink drain. It is called the sinkshroom. It is available in different sizes from 1-inch to 1.25 inches. Thus, it fits into your bathroom sink drain to keep the drain neat and clean.
Tips On How To Clean Tub Shroom Of Your Bathtub:
The tubshroom will remove the hair and debris from the bathtub drainer without limiting the water flow. Thankfully, cleaning it is easy too. You may clean a Tub shroom by removing it from the drain stopper and with water and a brush.
Step 1: Drain the water:
First, turn off the bathtub faucet. Then, leave the tub to dry for a couple of minutes. It also helps the drain to become dry as water runs through it. Once the bathtub water drains, you are ready to pry off the tub drain protector and hair catcher.
Step 2: Removing the Tub shroom:
Use your fingers to grab the top of the tubshroom and pry it from the draining point. If you find it hard to remove the drain protector with your hands, hold it with pliers. Once you hold it firmly with the pliers, you can pry it off confidently.
Step 3: Allow the tubshroom to dry:
You shouldn’t start cleaning the Tub shroom as soon as you remove it. Cleaning the wet hair and residue will be tougher. Thus, we suggest you keep the item in a drier place with adequate air ventilation for a couple of minutes.
It helps the bathtub hair catcher dry off properly. Once the product dries, it becomes easier for you to get hold of all the hairs and debris on it. It helps you clean the tub shroom faster and better.
Step 4: Remove the hairs and residues from it:
Once the tub shroom dries off properly, bang it against the trash can wall. It will remove most of the hairs and residues from the product. However, there will still be some hairs and residues left on it. Use an old brush to remove the remaining hairs and debris from it.
Step 5: Clean and remount the Tub Shroom:
Finally, use detergent and water to clean off the hair catcher perfectly. Use the brush to clean both sides of it. Then, rinse it with clean water and let it dry in a well-ventilated space. As the tub shroom dries off, you can also use a plumbing auger to clean the bathtub draining pipe.
Or else, apply a plunging mechanism to remove any remaining debris inside the tub drain. For this, place a stopper on the drain to block the water. Now, fill up the tub with at least 2 inches of water. Then, wait a few minutes to help the drain have a vacuum inside it. As you remove the stopper, the water will go through the drain at full speed. It will plunge all the residues.
Remount the tub shroom, and it’s ready to catch hairs again.
Tips on Dissolving Hair In Bathtub Drain Before Installing Tubshroom
Maybe you are installing the tub shroom for the first time in the tub drainer. Hence, it will be common to see hair inside the drainer. Before you mount the tub shroom, you should remove the hair from the drain using baking soda and vinegar. Alternatively, you may use salt and baking soda solution.
- Heat water in a kettle until it reaches boiling temperature
- Now, pour the boiling water inside the draining pipe
- Now, mix ¼ cup of baking soda along with 1 cup of vinegar
- Keep whisking the mixture until the baking soda dissolves
- Then, pour the mixture into the drain and wait for a couple of minutes
- After that, pour in boiling water again inside the drainer
As the drain becomes cleaner, you can install the Tub Shroom in it. It also stops chlorine buildup inside the draining pipe.
How Often Should You Clean the Tub Shroom?
You should clean the tub shroom once a month. It should work fine for one month without getting clogged to restrict the water flow. Thus, you should pry off the hair catcher once a month and clean it properly.
Conclusion:
You must know thoroughly how to clean a Tub Shroom. It takes around 20 to 30 minutes to clean the tubshroom. It is a brilliant hair catcher and drains protector product. When you clean it once every month, it will remain usable for years. Also, its plastic construction is made to last for years. So, clean and maintain this inexpensive but highly useful Tub Shroom for the best application in the bathtub.
Leave a Reply